Siemens 6ES7132-4BD02-0AA0 SIMATIC DP, 5 electronic modules for ET 200S, 4 DO standard 24 V DC/0.5 A

 

 

 

 

Data sheet 6ES7132-4BD02-0AA0
SIMATIC DP, 5 electronic modules for ET 200S, 4 DO standard 24 V DC/0.5 A, 15
mm width, 5 units per packing unit
Supply voltage
Reverse voltage protection Yes; when using the same load voltage as on the power module
Load voltage L+
● Rated value (DC) 24 V; From power module
● Reverse polarity protection Yes; polarity reversal can lead to the digital outputs being connected through
Input current
from load voltage L+ (without load), max. 10 mA; Per channel
from backplane bus 3.3 V DC, max. 10 mA
Power loss
Power loss, typ. 0.8 W
Address area
Address space per module
● Address space per module, max. 1 byte
● with packing 4 bit
Digital outputs
Type of digital output Source output (PNP, current-sourcing)
Number of digital outputs 4
Short-circuit protection Yes
● Response threshold, typ. 1 to 1.5 A
Limitation of inductive shutdown voltage to L+ (-55 to -60 V)
Controlling a digital input Yes
Switching capacity of the outputs
● on lamp load, max. 5 W
Load resistance range
● lower limit 48 Ω
● upper limit 3 400 Ω
Output voltage
● for signal "1", min. L+ (-1 V)
Output current
● for signal "1" rated value 0.5 A
● for signal "1" permissible range, min. 7 mA
● for signal "1" permissible range, max. 600 mA
● for signal "0" residual current, max. 0.3 mA
Output delay with resistive load
● "0" to "1", max. 50 μs
● "1" to "0", max. 120 μs
Parallel switching of two outputs
● for uprating No
● for redundant control of a load Yes; per module
Switching frequency
6ES71324BD020AA0
Page 1/2 1/11/2024 Subject to change without notice
© Copyright Siemens
● with resistive load, max. 800 Hz
● with inductive load, max. 2 Hz
● on lamp load, max. 10 Hz
Total current of the outputs
● Current per module, max. 2 A
Cable length
● shielded, max. 1 000 m
● unshielded, max. 600 m
Interrupts/diagnostics/status information
Diagnostics function No
Diagnostics indication LED
● Status indicator digital output (green) Yes
Parameter
Remark 1 byte
Potential separation
Potential separation digital outputs
● between the channels No
● between the channels and backplane bus Yes
Isolation
Isolation tested with 500 V DC
Dimensions
Width 15 mm
Height 81 mm
Depth 52 mm
Weights
Weight, approx. 40 g
last modified: 9/22/2023
6ES71324BD020AA0
Page 2/2 1/11/2024 Subject to change without notice
© Copyright Siemens